Home > Distribution Boards & Control Panels > Soft Starter Control Panel

Soft Starter Control Panel

Soft starter control panels are designed for low-voltage motor starting applications, helping reduce inrush current and mechanical stress during motor acceleration while providing reliable motor protection.

By integrating soft starters, protection devices, bypass contactors and control components, the panels can be configured according to motor ratings, load characteristics, starting requirements and project specifications.

Key Ratings

Rated Operational Voltage

380 / 400 / 415 / 480 V
Motor Power

Project-Specific
Rated Frequency

50 / 60 Hz
Control Mode

Local / Remote / Automatic
Installation

Indoor

Product Features

01
Reduced Starting Current

Helps limit motor starting current compared with direct-on-line starting.
02
Controlled Acceleration & Deceleration

Adjustable starting and stopping characteristics help reduce mechanical stress on motors and driven equipment.
03
Optional Bypass Operation

Optional bypass contactor configuration allows the motor to operate through the bypass circuit after the starting sequence is completed.
04
Reliable Motor Protection

Integrated protection and control components help support reliable motor operation under different load conditions.

Technical Specifications

Rated Operational Voltage	380 / 400 / 415 / 480 V
Rated Insulation Voltage	Up to 690 V
Rated Frequency	50 / 60 Hz
Phase	Three-Phase
Motor Power	Project-Specific
Starting Device	Soft Starter
Adjustable Starting Parameters	Initial Voltage / Current Limit / Ramp Time / Project-Specific
Stopping Mode	Soft Stop / Free Stop / Project-Specific
Control Mode	Local / Remote / Automatic
Bypass Configuration	Bypass Contactor / Project-Specific
Communication Interface	Modbus / Industrial Ethernet / Project-Specific
Enclosure Material	Steel / Project-Specific
Degree of Protection	IP30 / IP40 / IP54 / Project-Specific
Installation	Indoor
Applicable Standards	IEC 61439 Series / IEC 60947-4-2 Where Applicable / Project-Specific Requirements

Standards, Testing & Documentation

IEC-Oriented Design Basis

Designed with reference to applicable IEC requirements, drive manufacturer requirements and project specifications.

Factory Routine Inspection

Assembly, wiring, control logic and functional checks are carried out before shipment according to the supplied configuration.

Project Documentation

Technical datasheets, electrical drawings, control diagrams and configuration information can be provided for project review.

Technical Support

Engineering support is available for drive selection, motor matching, control configuration and project-specific requirements.

Download Product Catalogue

Discuss Your Soft Starter Control Panel Requirements

Share your motor rating, load type, starting requirements and project specifications with our team.

Request a Quote Talk to Our Engineers

Soft Starter Control Panel

Key Ratings

Rated Operational Voltage

Motor Power

Rated Frequency

Control Mode

Installation

Product Features

Reduced Starting Current

Controlled Acceleration & Deceleration

Optional Bypass Operation

Reliable Motor Protection

Technical Specifications