- Phone / WhatsApp:+86 157 0677 9792
- sales@toonice.com
-
English
Typical Configurations
-
01
Incoming Feeder
Main incoming power distribution configured according to project requirements. -
02
Outgoing Feeder
Outgoing circuits configured according to load and protection requirements. -
03
Bus Coupler
Bus-section and bus-coupling arrangements for sectionalized distribution systems. -
04
Metering Panel
Metering and measurement configurations according to project requirements. -
05
Motor Control
Motor starter and control configurations for industrial motor loads and motor control center (MCC) applications.
Technical Specifications
| Rated Operational Voltage | Up to 690 V |
| Rated Insulation Voltage | Up to 1000 V |
| Rated Current | Up to 4000 A |
| Rated Short-Time Withstand Current | Up to 50 kA / 1 s |
| Rated Frequency | 50 / 60 Hz |
| Functional Unit Type | Fixed |
| Form of Internal Separation | Form 2 / Form 3 / Form 4 / Project-Specific |
| Main Busbar Material | Copper / Project-Specific |
| Busbar Configuration | 3P / 3P + N / Project-Specific |
| Degree of Protection | IP40 / IP42 / Project-Specific |
| Cable Entry | Top / Bottom / Project-Specific |
| Installation | Indoor |
| Applicable Standards | IEC 61439-1 / IEC 61439-2 |
Standards, Testing & Documentation
IEC 61439 Design Basis
Designed with reference to applicable IEC 61439-1/-2 requirements and project specifications.
Factory Routine Testing
Routine inspections and tests are carried out before shipment according to applicable IEC 61439-1/-2 requirements and project specifications.
Project Documentation
Single-line diagrams, general arrangement drawings, technical datasheets and routine test records can be provided for project review.
Discuss Your GDF Switchgear Requirements
Share your system voltage, rated current, separation requirements and project specifications with our engineering team.
MV & LV Equipment Manufacturer · Wenzhou, China
COMPANY
PRODUCTS
INDUSTRIES
